LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC C0035-C0050 >> Component Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Testing

  1. Ignition OFF, disconnect the harness connector at the appropriate wheel speed sensor.
  2. Test for 850-1350 ohms of resistance between terminal A and terminal B of the wheel speed sensor.
    • If not within the specified range, replace the wheel speed sensor.
  3. Test for greater than 100 mV AC voltage between terminal A and terminal B of the wheel speed sensor, when spinning the wheel.
    • If not within the specified range, replace the wheel speed sensor.
scientia non olet · About LEMON Manuals