LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> Escalade EXT >> Repair and Diagnosis >> Steering >> Steering Linkage >> Repair Instructions >> Relay Rod Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  2. Remove the steering linkage shock absorber from the relay rod, if equipped. Refer to Steering Linkage Shock Absorber Replacement .
    3. Fig 1: View Of Idler Arm & Relay Rod
    GM1862675Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Discard the idler arm nut (6) and the pitman arm nut (4).
  3. Remove the steering linkage inner tie rods (3). Refer to Steering Linkage Inner Tie Rod Replacement .
  4. Remove the idler arm nut (6) and separate the idler arm (1) from the relay rod (5) using puller J 24319-B  .
  5. Remove the pitman arm nut (4) and separate the pitman arm (2) from the relay rod (5) using puller J 24319-B  .
  6. Remove the relay rod (5) from the vehicle.
  7. Inspect the threads and seals on all steering related components. Repair or replace components as needed.
scientia non olet · About LEMON Manuals