LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> Memory Seat Feature Inoperative >> Component Testing >> Memory Switch
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Memory Switch

  1. Disconnect the X4 harness connector at the DDS.
  2. Test for infinite resistance between the signal circuit terminal 5 and the 12-volt reference circuit terminal 14 with the switch in the open position.
    • If not the specified value, replace the memory switch.
  3. Test the resistance between terminal 5 and terminal 14 while pressing the memory 1, memory 2, and EXIT buttons. Compare the resistance readings to the values in the Memory Switch Values table below.
    • If the resistance is not within the specified range, replace the memory switch.
Memory Switch Values

Switch Position Resistance
Idle Infinite
Memory 1 2.03K-2.49K ohms
Memory 2 3.83K-4.69K ohms
Exit 9.32K-10.18K ohms
scientia non olet · About LEMON Manuals