LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> XLR V >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Data Communication System >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> BPP Sensor Calibration
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

BPP Sensor Calibration

IMPORTANT:
  • Always perform this procedure after the BCM was reprogrammed or after the brake pedal position sensor was replaced.
  • Do not press the brake pedal during the programming procedure.
  • A current DTC C0278 set by BCM before performing this procedure is a normal condition. The DTC will clear after the procedure is performed.

Refer to Brake Pedal Position Sensor Calibration .

scientia non olet · About LEMON Manuals