LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Lighting Systems) >> Repair Instructions >> Rear License Lamp Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of License Lamp
    GM1257687Courtesy of GENERAL MOTORS CORP.
  1. Install the license lamp bulb into the socket if replacing.
  2. Install the license lamp socket into the lamp assembly by inserting the socket and turning the socket clockwise.
  3. Install the license lamp (1) to the liftgate applique by sliding the lamp into the applique until an audible click is heard.
  4. Install the liftgate applique to the rear compartment lid. Refer to Liftgate Applique Replacement .
  5. Close the lift gate.
scientia non olet · About LEMON Manuals