Circuit/System Verification
- If DTCs P0107, P0108, P0641 or P0651 are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Ignition ON, observe the scan tool MAP Sensor parameter. Verify the MAP Sensor parameter is reading within the current BARO for your altitude. Refer to Altitude Versus Barometric Pressure .
- Ignition ON, observe the MAP Sensor kPa parameter with a scan tool. Start the engine. The MAP Sensor kPa parameter should decrease.
- Verify the integrity of the air induction system by inspecting for the following conditions:
- Damaged components
- Loose or improper installation
- An air flow restriction
- A cracked or restricted MAP sensor vacuum hose
- An intake manifold leak
- Ignition ON, compare APP sensors 1 and 2 percentages with a scan tool. Verify that they do not differ more than 5 percent when a slow pedal sweep is performed.