LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> STS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Wiper System & Washer System) >> Diagnostic Information and Procedures >> Scan Tool Data Definitions
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Scan Tool Data Definitions

WARNING: This page is about a different car, the 2006 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Battery Voltage Signal

The scan tool displays 0.0-16 volts. The battery voltage input represents the system voltage measured at the module ignition feed input.

Headlamp Washer Relay Status.

The scan tool displays On/Off. When the instrument panel module (IPM) receives a wash input, it will activate the low side drive output that controls the headlamp washer relay and the scan tool will display the status of the relay as On.

Headlamp Washer Switch

The scan tool displays On/Off. When the windshield wiper wash switch is pressed, the scan tool will display the switch input to the IPM as On.

scientia non olet · About LEMON Manuals