LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> SRX 4.6 A, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.6L - DTC P0340 To DTC P2544 >> DTC P1682 >> Circuit/System Verification
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Verification

  1. If DTCs P0685, P0690, or B1380 are set, diagnose those DTCs first.
  2. Ignition ON, engine OFF, observe the Ignition 1 signal, and the EC Ignition Relay Feedback Signal parameters, on the scan tool. Both parameter values should display no more than 3 volts difference, between the 2 parameters.
  3. Ignition OFF, observe the ignition 1 voltage signal parameter, on the scan tool. The parameter value should be 0 volts, before the ECM powers down.
  4. Engine running, observe the DTC information with a scan tool. DTC P1682 should not set.
  5. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame Records data.
scientia non olet · About LEMON Manuals