July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the tool storage compartment to the vehicle.
Install the nuts that retain the tool storage compartment to the vehicle.

Fig 1: Installing Tool Storage Compartment Nuts (PRO)
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the nuts that retain the tool storage compartment to the mounting brackets.
Tighten: Tighten the nuts to 10 N.m (88 lb in).
Lower the rear seat.