Front Side Door Window Regulator Replacement (Power)

Fig 1: View Of Front Side Door Window Regulator & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Position the front side door window approximately half way down in the door. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement . Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
1	Front Side Door Window Bolts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in) Tip: Tape the window to the door frame to prevent it from moving. Loosen the 2 bolts that attach the window to the window regulator.
2	Front Side Door Window Regulator Bolts (Qty: 3) Tighten: 9 N.m (80 lb in)
3	Front Side Door Window Regulator Nuts (Qty: 2) Tighten: 9 N.m (80 lb in)
4	Front Side Door Window Regulator Tip: Disconnect the electrical connector. Transfer the power window motor to the new regulator. Refer to Front Side Door Window Regulator Motor Replacement .