LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

    Fig 1: View Of Brake Pedal Position Sensor Electrical Connector, Brake Pedal Position Sensor & Bolts
    GM1687770Courtesy of GENERAL MOTORS CORP.
  1. Remove the driver knee bolster. Refer to Knee Bolster Replacement (Cadillac) or Knee Bolster Replacement (Except Cadillac) .
  2. Remove the fuse block cover.
  3. Disconnect the brake pedal position sensor electrical connector (1).
  4. Remove the brake pedal position sensor bolts (2).
  5. Remove the brake pedal position sensor (3) from the vehicle.
scientia non olet · About LEMON Manuals