LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> STS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Object Detection System - Park Assist System) >> Repair Instructions >> Rear Parking Assist Alarm Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  1. Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Sedan) , Rear Bumper Fascia Replacement (Coupe) , Rear Bumper Fascia Replacement (Wagon) .
  2. Disconnect electrical from the rear object sensor.
    3. NOTE:

    The rear object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.

  3. Lift the locking tabs on the housing and remove the rear object sensor.
scientia non olet · About LEMON Manuals