LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> DTS 4.6 Y >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.6L - Introduction (2 Of 2) >> Repair Instructions >> Air Cleaner Outlet Duct Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Air Cleaner Outlet Duct
    GM1670799Courtesy of GENERAL MOTORS CORP.
  1. Install air cleaner outlet duct to the vehicle and the MAF/IAT sensor.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.

    Tighten:  Tighten the clamp to 3 N.m (27 lb in).

  4. Fig 2: Air Cleaner Outlet Duct
    GM1670790Courtesy of GENERAL MOTORS CORP.
  5. Install the air cleaner outlet duct to the throttle body.
  6. Tighten the air cleaner outlet duct clamp at the throttle body.

    Tighten:  Tighten the clamp to 3 N.m (27 lb in).

  7. Fig 3: PCV Fresh Air Tube
    GM1661022Courtesy of GENERAL MOTORS CORP.
  8. Connect the PCV fresh air tube quick connect fitting to the air cleaner outlet duct. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  9. Fig 4: MAF/IAT Sensor Connector
    GM1670786Courtesy of GENERAL MOTORS CORP.
  10. Connect the engine harness electrical connector to the MAF/IAT sensor.