LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> CTS V6-2.8L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair >> Dash Integration Module Replacement (Body Control Module)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Dash Integration Module Replacement (Body Control Module)



DASH INTEGRATION MODULE REPLACEMENT (BODY CONTROL MODULE)

REMOVAL PROCEDURE




1. Remove the instrument panel (I/P) closeout panel.
2. Disconnect the closeout panel light electrical connector (1).
3. Remove the screws securing the body control module (BCM) to the I/P.
4. Disconnect the electrical connectors.

INSTALLATION PROCEDURE




1. Connect the electrical connectors to the BCM.
2. Install the screws securing the BCM to the I/P.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (15 lb in).

3. Connect the closeout panel light electrical connector (1).
4. Install the I/P closeout panel.
5. If installing a replacement BCM, program the BCM. Refer to Control Module References for programming and setup information. Programming and Relearning
scientia non olet · About LEMON Manuals