LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> SRX 3.6 7, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Rear Integration Module Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the right rear body side trim. Refer to Trim Panel Replacement - Body Side Rear in Interior Trim.
    2. Fig 1: View Of RIM Electrical Connectors
    GM1210878Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connectors (1) from the rear integration module (RIM).
    3. Fig 2: View Of RIM
    GM1210870Courtesy of GENERAL MOTORS CORP.
  3. Remove the RIM from the mounting bracket.
scientia non olet · About LEMON Manuals