Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Starter Motor & Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Connect the starter motor "S" terminal wire.
Tighten: Tighten the starter solenoid S terminal nut to 4 N.m (35 lb in).
Connect the starter motor BAT terminal wire.
Tighten: Tighten the battery cable to starter terminal nut to 10 N.m (89 lb in).
Install the starter motor.
Install the starter motor mounting bolts.
Tighten: Tighten the starter motor mounting bolts to 30 N.m (22 lb ft).
Install the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.6L.
Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .