LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> CTS V6-3.6L VIN 7 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions



SCAN TOOL DATA DEFINITIONS

Battery Voltage: The scan tool displays 0.0-16.0 volts. The battery voltage input represents the system voltage measured at the BCM ignition feed input.

Calibration ID: The scan tool displays the calibration ID.

Component Serial No.: The scan tool displays the component serial number.

Driver/Pass./Left Rear/Rt. Rear Door Jamb Sw.: Input from the respecting door indicating door status.

Ignition Accessory/Run: Input from ignition switch Accessory circuit. Used to determine power mode. Active in ACC and ON.

Ignition Switch: The scan tool displays Off/RAP/Accy./Run/Crank. The power mode is mapped to this input.

Ignition 1 Run/Crank: Input to the control module from the ignition switch indicating the Ignition 1 position. Active in ignition switch positions ON and START.

Key in Ignition: Input from ignition switch indicating that the ignition key is inserted into the ignition switch.

Julian Date of Build: The day of the year when module was built.

PROM ID: The scan tool displays the PROM ID.

Year Module Built: The year when module was built.

8 Digit GM Part Number: The module's part number.
scientia non olet · About LEMON Manuals