LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> CTS V >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Shift Interlock System) >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Shift Lock Actuator Attaching Screws
    GM801326Courtesy of GENERAL MOTORS CORP.
  1. Install the shift lock actuator (2) to the shift control assembly.
  2. Install the three shift lock actuator attaching screws (1).
    3. Fig 2: Identifying Shift Lock Control Wiring Harness Connector
    GM834512Courtesy of GENERAL MOTORS CORP.
  3. Slide the pigtail connector (2) onto the retainer (3).
  4. Connect the wiring harness connector (1) to the shift lock control pigtail connector (2).
  5. Install the pigtail harness into the wire retainer (4).
  6. Install the center console assembly. Refer to Console Replacement - Front Floor in Instrument Panel, Gages and Console.
  7. Install the shift control boot. Refer to Floor Shift Control Boot Replacement .
scientia non olet · About LEMON Manuals