LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Yaw Rate Sensor/Lateral Accelerometer Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Connect the yaw rate sensor/lateral accelerometer sensor electrical connector.
    2. Fig 1: Removing & Installing Yaw Rate Sensor/Lateral Accelerometer
    GM1250841Courtesy of GENERAL MOTORS CORP.
  2. Install the yaw rate sensor/lateral accelerometer sensor (2) to the vehicle.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the yaw rate sensor/lateral accelerometer sensor mounting nuts (1) to the mounting studs.

    Tighten:  Tighten the yaw rate sensor/lateral accelerometer sensor mounting nuts to 9 N.m (80 lb in).

  4. Install the center console to the vehicle. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
  5. Perform the System Check-Vehicle. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.
scientia non olet · About LEMON Manuals