LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Floor Shift Control Boot Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Set the parking brake.
    2. Fig 1: Removing & Installing Shift Boot
    GM795752Courtesy of GENERAL MOTORS CORP.
  2. Remove the shift boot from the console trim plate by lightly prying up on the rear of the shift control boot.
    3. Fig 2: Removing & Installing Shift Knob Retaining Screw
    GM795757Courtesy of GENERAL MOTORS CORP.
  3. Lift the shift control boot up over the shift knob.
  4. Remove the shift knob retaining screw.
    5. Fig 3: Removing & Installing Shift Control Boot & Knob Assembly
    GM795758Courtesy of GENERAL MOTORS CORP.
  5. Lift the shift control boot and knob assembly off of the shift lever.
scientia non olet · About LEMON Manuals