Installation Procedure

Fig 1: Power Steering Pressure Hose

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the power steering pressure hose to the power steering gear.
Tighten: Tighten the fitting to 27 N.m (20 lb ft).

Fig 2: Power Steering Pressure Hose, Pump & Gear

Courtesy of GENERAL MOTORS CORP.

Install the power steering pressure hose to the power steering pump.
Tighten: Tighten the fitting to 27 N.m (20 lb ft).
Lower the vehicle.
Bleed the power steering system. Refer to Bleeding the Power Steering System .