LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Wiper System & Washer System) >> Repair Instructions >> Windshield Outside Moisture Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rain Sensor Module & Electrical Connector
    GM746991Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the rain sensor module.
  2. Install the rain sensor module in the windshield coupler.
  3. Fasten the windshield coupler retainer clips.
    4. Fig 2: View Of Rain Sensor Module Trim Cover
    GM746989Courtesy of GENERAL MOTORS CORP.
  4. Install the trim cover on the rain sensor module.
  5. Push inward in order to secure the cover to the rain sensor module.
  6. The cover will snap into position.
scientia non olet · About LEMON Manuals