Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Right Front Fascia Extension & Fasteners

Courtesy of GENERAL MOTORS CORP.

Remove the right front fascia extension (2) in order to access the washer solvent container level sensor. Refer to Fascia Extension Replacement - Front in Bumpers.

Fig 2: View Of Washer Pump & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector from the washer solvent level sensor.
Using a flat-bladed tool, gently pry upward on the lower edge of the level sensor between the sensor and grommet.
Remove the washer solvent level sensor from the washer solvent container.
Remove the grommet and discard.