LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the splash shield (25/35 series).
    2. Fig 1: Splash Shield (25/35 Series)
    GM371077Courtesy of GENERAL MOTORS CORP.
  2. Install the splash shield (15 series).
    3. Fig 2: Splash Shield (15 Series)
    GM371033Courtesy of GENERAL MOTORS CORP.
  3. Install the hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement (RWD) or Wheel Hub, Bearing, and Seal Replacement (4WD) in Front Suspension.
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Remove the safety stands.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals