DTC P1639: 5-Volt Reference 2 Circuit: Description

The PCM uses the 5-volt reference 2 circuit as a sensor feed for the following sensors:

• The AC pressure sensor.
• The Fuel Tank Pressure (FTP) sensor.

These 5-volt reference circuits are independent of each other outside the PCM, but are bussed together inside the PCM. Therefore a circuit condition on one sensor 5-volt reference circuit may affect the other sensor 5-volt reference circuit. The PCM monitors the voltage on the 5-volt reference circuit. If the PCM detects that the voltage is out of tolerance, DTC P1639 sets.