Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Headlamp Leveling Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Position the sensor (1) to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 2: Removing & Installing Front Headlamp Leveling Sensor

Courtesy of GENERAL MOTORS CORP.

Install the bolt (2) to secure the sensor to the vehicle.
Tighten: Tighten the bolt to 9 N.m (80 lb in)
Install ball and socket (1) to sensor.

Fig 3: Identifying Front Headlamp Leveling Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (1) to the sensor.
Install the right tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
Lower the vehicle.