Removal Procedure
WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 for driver's seat or SIR Disabling and Enabling Zone 9 for passenger seat.
- Partially remove the seat back panel to access the wiring.
- Remove the inflatable restraint side impact module (2) from the seat (1). Refer to Inflatable Restraint Side Impact Module Replacement - Front .
With the seat back panel removed, the inflatable restraint side impact module wiring harness (3) will be exposed.
- Remove the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).
CAUTION:
Refer to SIR Inflator Module Handling and Storage Caution
in Cautions and Notices.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.
IMPORTANT:
Removal of the right or the left inflatable restraint side impact module wiring harness uses the same procedure.