LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2003 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new stud from the back side of the hub.
  2. Install flat washers on the wheel stud.

    Important:  Ensure that the wheel stud is fully seated against the wheel hub flange.

  3. With the flat side of a wheel nut against the washers, tighten the wheel nut until the wheel stud head seats against the wheel hub flange.
  4. Install the brake rotor. Refer to Brake Rotor REMOVAL (FRONT) in Disc Brakes.
  5. Install the tire and wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
  6. Lower the vehicle.
    Fig 1: Installing New Stud From Back Side Of Hub
    G02085732Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals