LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 598 (Seat Belt System) >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2003 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Important:  During installation ensure that the child tether anchors are installed with the anti-rotation tabs firmly seated in the anti-rotation tab holes on the cross car beam.

  1. Install the child tether anchor to the cross car beam.
    NOTE: Refer to Fastener Notice   in Cautions and Notices.
  2. Install the child tether anchor bolt.

    Tighten 

    Tighten the bolt to 30 N.m (22 lb ft).

  3. Install the rear shelf trim panel. Refer to TRIM PANEL REPLACEMENT -- REAR WINDOW SHELF in Interior Trim.
    Fig 1: Child Tether Anchors
    G02096498Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals