Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position the spark plug washer.
- Inspect the spark plug gap. Adjust the gap as needed.
Specification: Spark plug gap: 1.016 mm (0.040 in)
- Hand start the spark plug in the corresponding cylinder.NOTE: Refer to Fastener Notice in Cautions and Notices.
- Tighten the spark plug.
Tighten:
- Tighten the plug to 15 N.m (11 lb ft) for used heads.
- Tighten the plug to 20 N.m (15 lb ft) for NEW heads.
- Install the spark plug wire. Refer to Spark Plug Wire Replacement .