LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 1999 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Remove/Install/Overhaul 4.6L) >> Fuel System >> Oxygen Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oxygen Sensor: Installation

WARNING: This page is about a different car, the 1998 Cadillac Seville, 1998 Cadillac Eldorado, and 1998 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Whenever an oxygen sensor is removed, coat threads with anti-seize compound before installation. New oxygen sensors already have this compound applied to threads.
  2. Install oxygen sensor in exhaust pipe. Tighten oxygen sensor to 30 ft. lbs. (41 N.m). Reconnect electrical connector to oxygen sensor. Reconnect negative battery cable.
scientia non olet · About LEMON Manuals