October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal & Installation
- Relieve fuel pressure. See FUEL PRESSURE RELIEF under FUEL SYSTEM. Disconnect negative battery cable. Remove filler neck. Lower fuel tank. Disconnect fuel lines and electrical connection.
- Remove fuel level sending unit and fuel pump retaining bolts or cam lock ring. Lift assembly from fuel tank and remove fuel pump from sending unit.
- Pull fuel pump upward while pulling away from bottom support. Use care not to damage rubber insulator and strainer. To install, reverse removal procedure using NEW "O" ring and gasket.