LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Anti-Lock/Traction Control) >> Removal & Installation >> Control Pressure Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Control Pressure Switch: Installation

WARNING: This page is about a different car, the 1990 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install control pressure switch on booster/master assembly. Tighten to 22 lbs. ft. (30 N.m).
  2. Connect control pressure switch connector at sensor block.
scientia non olet · About LEMON Manuals