LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 1987 >> Seville V8-252 4.1L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Technical Service Bulletins >> Recalls >> Recall - Potential Loss of Headlights >> Service Procedure and Credit
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Service Procedure and Credit

1. Remove the Body Control Module (BCM) and the BCM E-PROM in accordance with the Service Procedure in Section 8C of the 1986/1987 Cadillac Service Information Manual - Eldorado and Seville.

2. Install new service E-PROM into the E-PROM socket of the BCM (Refer to Section 8C; 1986/1987 Cadillac Service Information Manual - Eldorado and Seville).

3. Install BCM onto vehicle in accordance with the above stated procedure.

4. Install the Campaign Completion Label on a clean, dry surface of the radiator support tie bar.

CREDIT

Credit for this campaign will be issued upon receipt of a properly prepared warranty claim which includes information from one of the following Labor Operations:

Failed Parts Failure Labor Labor*
Description Part No. Allowance Code Operation Hours

Replace Calibrator (E-PROM)

1986 Eldorado or 1228483 *** 96 V3910 .4
Seville

1987 Eldorado or 16075605 *** 96 V3910 .4
Seville

* This labor time represents the actual time required to perform the correction.
Dealers should apply for 0.1 additional hour for administrative allowance as "Other Labor Hours".

*** The parts allowance should be the total of the current GMSPO net plus 30% for the part (E-PROM) required for this repair.

scientia non olet · About LEMON Manuals