LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2020 >> Regal Preferred >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Programming And Setup - All Systems) >> Repair Instructions >> K40P Seat Memory Control Module - Passenger: Programming and Setup >> Replace and Program Control Module or Reprogram Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Control Module or Reprogram Control Module

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing control module, perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K40P Seat Memory Control Module - Passenger - Programming and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  5. Move the seat to a central, middle range position, then perform the memory store operation for memory "1", "2", and "Exit" or "3" if equipped. Refer to the Owner's Manual for storing memory seat positions.
scientia non olet · About LEMON Manuals