LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Hydraulic Brake System) >> Repair Instructions >> Brake Fluid Level Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Without draining the coolant and without disconnecting the hoses, position aside the radiator surge tank. - Radiator Surge Tank Replacement
  2. Disconnect the brake fluid level sensor electrical connector.
  3. GM4234161Courtesy of GENERAL MOTORS COMPANY

    Using an appropriate tool, lift upward to release the brake fluid level sensor locking tab (1).

  4. GM4234167Courtesy of GENERAL MOTORS COMPANY

    Brake Fluid Level Sensor (1) - Remove