LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C012A >> Circuit/System Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Testing

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC C012A is not set.
    • If DTC C012A is set 
    1. Replace the Q5 Brake Pressure Modulator.
    2. Verify that DTC C012A is not set while driving the vehicle under normal braking conditions.
      • If DTC C012A is set, replace the K17 Electronic Brake Control Module.
      • Go to next step: If DTC C012A is not set.
    3. All OK.
    • Go to next step: If DTC C012A is not set 
  3. All OK.
scientia non olet · About LEMON Manuals