Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, 2019 Buick Regal, and 2018 Buick Regal TourX. However, it is still accessible from the selected car via links, so may be relevant.
Battery Cover (1) - Install
{If equipped} Electrical Connector (1) @ Retainer (2) - Install
Battery Hold Down Retainer (3) - Install
- Battery Hold Down Bolt (1) - Install and tighten [2x] 9 N.m (80 lb in)
- Battery Hold Down Retainer Nut (2) - Install and tighten 9 N.m (80 lb in)
Battery Distribution Engine Compartment Fuse Block (1) - Install
Retainer (2) - Install
- Battery Positive Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
Battery Distribution Fuse Block Cover (1) - Install
- Retainer (2) - Install [2x]
Engine Control Module Bracket (1) - Install - Engine Control Module Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (3.6L LGX) , or Battery Negative Cable Disconnection and Connection (2.0L LTG)
CAUTION: