Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Brake Caliper (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Brake Caliper Guide Pin Bolt (1) - Install [2x] 25 N.m (18 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Caliper Guide Pin Seal (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Brake Caliper Spring (1) - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Install NEW brake hose fitting gaskets.

Brake Hose Fitting Gasket (1) [2x] @ Brake Hose Fitting (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Fitting Bolt (1) - Install 40 N.m (30 lb ft)
Connect the electronic parking brake actuator electrical connector.
Bleed the brake system. Hydraulic Brake System Bleeding (Manual)Hydraulic Brake System Bleeding (Pressure)
Install the tire and wheel assembly. Tire and Wheel Removal and Installation