LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2018 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Vehicle Access System) >> Repair Instructions >> Front Side Door Lock Cylinder Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4632735Courtesy of GENERAL MOTORS COMPANY

    Front Side Door Lock Cylinder (3) @ Front Side Door Outside Handle Bracket (2) - Install

  2. Front Side Door Lock Cylinder Rod (1) @ Front Side Door Lock Cylinder (3) - Install
  3. GM4632714Courtesy of GENERAL MOTORS COMPANY

    Install the front side door latch cover (2).

  4. Install the front side door latch cover bolt (1) and tighten 2.5 N.m (22 lb in)
  5. GM4632712Courtesy of GENERAL MOTORS COMPANY

    Install the front side door latch with front side door outside handle bracket (1) to the front side door.

  6. GM4632711Courtesy of GENERAL MOTORS COMPANY

    Front Side Door Latch Bolt (2, 3) - Install and tighten [3x] 9 N.m (80 lb in)

  7. Install the front side door latch cover bolt (1) and tighten 2.5 N.m (22 lb in)
  8. Connect the electrical connector. (4)
  9. GM3952753Courtesy of GENERAL MOTORS COMPANY

    Front Side Door Outside Handle Bracket Screw (1) - Install and tighten 4.7 N.m (42 lb in)

  10. Front Side Door Outside Handle Replacement (Without Keyless Entry) , or Front Side Door Outside Handle Replacement (With Keyless Entry)  - Install
  11. Front Side Door Water Deflector Replacement - Install