LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2018 >> Envision Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Power Transfer Unit/Transfer Case - AAM >> Repair Instructions - On Vehicle >> Fill Plug Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Fill the transfer case to the bottom of the fill plug hole with the recommended fluid. Refer to Adhesives, Fluids, Lubricants, and Sealers , and Approximate Fluid Capacities .
  2. GM3937119Courtesy of GENERAL MOTORS COMPANY

    Install a NEW fill plug (1) and seal and tighten to 40 N.m (30 lb ft).

  3. Lower the vehicle.