Circuit/System Verification

DTC C056E 4B

1. Ignition ON.
2. Verify that DTC C056E 4B is not set.
   • If the DTC C056E 4B is set 
   1. Perform the Setup and Configuration step of programming the K17 Electronic Brake Control Module.
      NOTE:

      It is not necessary to perform the Programming step in the case of this DTC.

   2. Verify the DTC does not set.
      • If the DTC sets, replace the K17 Electronic Brake Control Module.
      • If the DTC does not set
   3. All OK.
   • If the DTC C056E 4B is not set 
3. All OK.