LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Manual Transmission - Mu3) >> Repair Instructions - On Vehicle >> Shift Control Assembly Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Floor Pan Grommet & Mounting Nuts
    GM867994Courtesy of GENERAL MOTORS CORP.
  1. Position the shifter on the studs and install the front 2 nuts (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the 2 rear nuts (3) and tighten to 25 N.m (18 lb ft).
  3. Install the shift cables. Refer to Shift Control Cable Replacement .
  4. Install the console. Refer to Front Floor Console Replacement .
scientia non olet · About LEMON Manuals