Communication Interface Module Replacement

Fig 1: Communication Interface Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Communication Interface Module Procedure Lower the rear window trim panel speaker opening cover where needed to access the module. Unsnap the module from the bracket. Disconnect the electrical connector. Reprogram the communication interface module after installation. Refer to Control Module References .

Callout

Component Name

Communication Interface Module

Procedure

Lower the rear window trim panel speaker opening cover where needed to access the module.
Unsnap the module from the bracket.
Disconnect the electrical connector.
Reprogram the communication interface module after installation. Refer to Control Module References .