LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Fuel Pump Flow Control Module Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Pump Flow Control Module Replacement

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Pump Flow Control Module
GM2206953Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the passenger rear side trim panel. Refer to Rear Compartment Side Trim Panel Replacement .
1 Fuel Pump Flow Control Module Fastener (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten:  9 N.m (80 lb in)
2 Fuel Pump Flow Control Module

Procedure

  1. Disconnect the electrical connector.
  2. If replacing, reprogram the module. Refer to Control Module References .
scientia non olet · About LEMON Manuals