LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2011 >> Lucerne V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oil Pressure Sensor: Service and Repair




Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

1. Remove the oil filter adapter. Refer to Oil Filter Adapter Replacement (Service and Repair).




2. Remove the engine oil pressure switch (1) from the oil filter adapter (3).

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the engine oil pressure switch (1) to the oil filter adapter (3).

Tighten the engine oil pressure switch to 16 Nm (12 lb ft).

2. Install the oil filter adapter. Refer to Oil Filter Adapter Replacement (Service and Repair).
3. Lower the vehicle.
4. Adjust the engine oil level to the full mark.
5. Inspect for oil leaks after engine start up.

scientia non olet · About LEMON Manuals