Digital Radio Receiver Replacement

Fig 1: Identifying Digital Radio Receiver

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the left rear quarter trim panel. Refer to Quarter Upper Trim Panel Replacement .
1	Digital Radio Receiver Nut (Qty: 2) CAUTION: Refer to Fastener Caution . TIP: The nuts only need to be loosened enough so that the receiver can be moved so that the nuts will fit through the keyhole slot to remove. Tighten 10 N.m (89 lb in)
2	Digital Radio Receiver Assembly Disconnect the antenna cable. Reprogram the digital radio receiver after installation. Refer to Control Module References .