September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Component Testing
- Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
- Test the resistance between the voltage reference terminal 3 and the signal terminal 4 while depressing the appropriate steering wheel controls switch listed below.
- If not the specified range, replace the steering wheel switch.
| Function Switch |
Minimum Resistance Value |
Maximum Resistance Value |
| Mute/Voice Recognition |
1.0k Ohms |
1.4k Ohms |
| Volume Down |
1.3k Ohms |
1.7k Ohms |
| Volume Up |
1.7k Ohms |
2.1k Ohms |
| Previous |
2.8k Ohms |
2.6k Ohms |
| Next |
2.2k Ohms |
3.2k Ohms |
| Source |
3.6k Ohms |
4.0k Ohms |
| Seek |
5.1k Ohms |
5.5k Ohms |
| No Switch Pressed |
O.L. |
O.L. |