LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2009 >> LaCrosse CX >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement (L26) >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

    Fig 1: View Of Right Side Of Engine Compartment
    GM1552765Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the instrument panel (I/P) harness electrical connector (2) from the battery current sensor (1).
  2. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (L26) .
    3. Fig 2: Battery Current Sensor
    GM2065396Courtesy of GENERAL MOTORS CORP.
  3. Cut the tie straps and electrical tape (2) attaching the battery current sensor (1) to the battery cable.
  4. Squeeze the negative battery cable branches together.
    5. IMPORTANT: Note the position of the battery current sensor prior to removal.
  5. Slide the battery current sensor (1) off of the negative battery cable.
scientia non olet · About LEMON Manuals