Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Disconnect the windshield wiper transmission link in front of the wiper motor and position out of the way. Refer to Wiper Motor Module Replacement .
- Rotate the engine forward. Refer to Rotating the Engine for Service Access .
- Remove the drive belt. Refer to Drive Belt Replacement .
- Disconnect the engine harness electrical connector from the generator.
- Reposition the positive battery cable boot at the generator terminal.
- Remove the positive battery cable terminal nut at the generator.
- Remove the positive battery cable terminal from the generator.
- Remove the generator lower bolts.
- Remove the generator upper bolt.
- Remove the generator.